Article | REF: AM5232 V1

Through-Transmission Laser Welding of Composites

Authors: André Chateau AKUE ASSEKO, Benoît COSSON

Publication date: October 10, 2023

You do not have access to this resource.
Click here to request your free trial access!

Already subscribed? Log in!


Overview

Français

ABSTRACT

This article examines the assembly technologies for polymers and thermoplastic composites. It focuses on laser transmission welding, an effective and clean method. The physical and thermal phenomena of welding are addressed, as well as the modeling and simulation of the assembly process. Optimizing the final quality requires characterizing the optical and thermal properties of composite materials, understanding the process parameters such as laser power, speed, and beam diameter, and utilizing virtual engineering tools such as ray tracing and finite element method.

Read this article from a comprehensive knowledge base, updated and supplemented with articles reviewed by scientific committees.

Read the article

AUTHORS

  • André Chateau AKUE ASSEKO: Teacher-researcher - IMT Nord Europe, Institut Mines Télécom, Université Lille, Centre Matériaux et Procédés, Villeneuve d'Ascq, France

  • Benoît COSSON: HDR teacher-researcher - IMT Nord Europe, Institut Mines Télécom, Université Lille, Centre Matériaux et Procédés, Villeneuve d'Ascq, France

 INTRODUCTION

Thermoplastic composite materials are attracting growing interest in a wide range of industrial sectors, especially in the transport sector (aeronautics and automotive in particular). They form components and parts that often need to be assembled to form more complex modules and structures. This has led to growing interest in thermoplastic composite assembly technologies, including laser welding.

Laser welding technology offers specific advantages for industrial applications over other conventional technologies: the process is precise, flexible, easy to control and automate and non-contaminating, an absence of vibration during the welding process, very fast welding speed enabling long parts to be welded with an acceptable welding time (a few seconds).

The laser welding process involves two parts. One part is semi-transparent at the laser wavelength, and the other is absorbent at the same wavelength. The process is based on the principle of heating the interface (forming a weld bead), and consolidating it by applying pressure to the area to be welded. The power of the laser beam is transmitted through the "semi-transparent" material and absorbed at the interface by the "absorbent" material. Contact between the two parts causes the temperature of the weld zone to rise, as heat is transferred by conduction between the two parts. As a result, the two materials fuse together. When welding heterogeneous materials such as composites, a number of difficulties arise. These materials are heterogeneous because they are fiber-reinforced. The passage of the laser beam through such media results in divergence of the laser beam's optical path (refraction phenomenon) caused by the multiplication of fibres-matrix interfaces in the material. The laser power arriving at the welding interface is thus reduced by refraction and absorption in the semi-transparent, scattering medium.

A good quality weld joint depends on a good understanding of the behavior of the materials to be joined under infrared laser irradiation, and on the correct identification of the temperature at the weld interface using modeling and simulation tools.

The aim of this article is to review the principles of laser transmission welding, to highlight the particularities resulting from the heterogeneous structure of the thermoplastic composites to be joined, and to propose virtual engineering tools for optimizing the welding process to produce quality welds.

You do not have access to this resource.

Exclusive to subscribers. 97% yet to be discovered!

You do not have access to this resource.
Click here to request your free trial access!

Already subscribed? Log in!


The Ultimate Scientific and Technical Reference

A Comprehensive Knowledge Base, with over 1,200 authors and 100 scientific advisors
+ More than 10,000 articles and 1,000 how-to sheets, over 800 new or updated articles every year
From design to prototyping, right through to industrialization, the reference for securing the development of your industrial projects

KEYWORDS

assembly technologies for polymers   |   simulation of the assembly process   |   modeling of the assembly process   |   virtual engineering tools


This article is included in

Plastics and composites

This offer includes:

Knowledge Base

Updated and enriched with articles validated by our scientific committees

Services

A set of exclusive tools to complement the resources

Practical Path

Operational and didactic, to guarantee the acquisition of transversal skills

Doc & Quiz

Interactive articles with quizzes, for constructive reading

Subscribe now!

Ongoing reading
Laser transmission welding of composites
Outline