Overview
FrançaisABSTRACT
The use of high power lasers in the industrial, scientific, medical, or defense sector is often hampered by damage on optical components. Under high laser flux, stress or deformations appear and revert back to normal. However, under higher energy or intensity energy or intensity, other effects are observed (melting, vaporization, cracks, craters, etc.) which are this time irreversible and can lead to the destruction of the component. This article explains the phenomena involved, presents methods for measuring resistance to the laser flux and the influence of laser parameters (physical and operational) on this damage.
Read this article from a comprehensive knowledge base, updated and supplemented with articles reviewed by scientific committees.
Read the articleAUTHOR
-
Laurent GALLAIS: Engineer from the École Nationale Supérieure de Physique de Marseille, Doctor 3e cycle - Senior Lecturer, École Centrale Marseille – Institut Fresnel
INTRODUCTION
High-power lasers are used in a wide range of applications in industry, science, medicine and defense. One of the technological obstacles to the development of high-power or high-energy laser sources is damage to optical components under irradiation. Indeed, when a high laser flux passes through an optical component or is reflected on a mirror, reversible effects can be observed, such as non-linear effects or heating, which can cause stress and deformation. If the quantity of light is increased (either by increasing the intensity or by confining the beam), irreversible effects can occur: melting, vaporization, cracking, shattering, craters, delamination... altering the optical function of the component, or even rendering it unusable. These permanent changes to the material are referred to as "laser damage". The disadvantage of this phenomenon is that it affects the service life of optical components, as well as the maintenance costs of laser chains. It can also lead to serious safety problems. Understanding the physical phenomena involved in laser parameters, and measuring these effects, is therefore of major importance when it comes to designing a laser system and operating it under optimum conditions of reliability, safety and cost-effectiveness.
The problem of flux resistance has been studied since the invention of the laser, and there is an impressive database on the subject. . In this article, we propose a synthetic approach to this subject, necessarily limited, but which will enable the engineer or researcher confronted with the problem to familiarize himself with the concepts related to the field, the physical phenomena involved and the way in which these effects can be quantified and the measurements related to its application.
First, we'll explain the various physical mechanisms that can lead to the destruction of an optical component subjected to laser flux, a necessary step in understanding and interpreting the measurements. We will then describe the methods used to measure resistance to laser flux, and discuss their interpretation and the influence of laser parameters on damage. Finally, we will briefly present the materials and manufacturing processes specific to laser flux-resistant components.
Exclusive to subscribers. 97% yet to be discovered!
You do not have access to this resource.
Click here to request your free trial access!
Already subscribed? Log in!
The Ultimate Scientific and Technical Reference
CAN BE ALSO FOUND IN:
This article is included in
Mechanical and dimensional measurements
This offer includes:
Knowledge Base
Updated and enriched with articles validated by our scientific committees
Services
A set of exclusive tools to complement the resources
Practical Path
Operational and didactic, to guarantee the acquisition of transversal skills
Doc & Quiz
Interactive articles with quizzes, for constructive reading
Laser damage metrology
Bibliography
Standards and norms
- Determination of laser induced threshold on optical surfaces – part 1: 1-on-1. - ISO 11254-1 - 2000
- Determination of laser induced threshold on optical surfaces – part 2: S-on-1. - ISO 11254-2 - 2000
Patents
C. R. Wolfe, M. R. Kozlowski, J. H. Campbell, M. Staggs and F. Rainer, "Permanent laser conditioning of thin film optical materials", U.S. Patent, no. 5472748, 1990.
P. Bouchut, J.G. Coutard, A. During, "Method and device for preventive treatment of an optical surface exposed to laser flux", Patent no. FR2896794, 2007.
P. Cormont, L. Gallais and J.-L. Rullier, "Process for the...
Exclusive to subscribers. 97% yet to be discovered!
You do not have access to this resource.
Click here to request your free trial access!
Already subscribed? Log in!
The Ultimate Scientific and Technical Reference