Overview
FrançaisABSTRACT
This article deals with the different technologies for producing ceramic parts with different additive manufacturing processes. After a presentation of the principle of additive manufacturing, the associated elements of the numerical chain and some problems that may arise, the different technologies used to produce ceramic parts are presented. For each one, the technical principle, advantages, limitations and some examples of application are provided. Technical and technical-economic utility is discussed, and the article ends with the new problems generated by the industrialization and quality control of these processes.
Read this article from a comprehensive knowledge base, updated and supplemented with articles reviewed by scientific committees.
Read the articleAUTHORS
-
Thierry CHARTIER: Research Director – CNRS - Ceramics Research Institute (IrCer) – UMR CNRS 7315; European Ceramics Centre, Limoges, France
-
Vincent PATELOUP: Associate Professor – University of Limoges - Ceramics Research Institute (IrCer) – UMR CNRS 7315; European Ceramics Centre, Limoges, France
-
Christophe CHAPUT: Chairman - 3DCeram, Limoges, France
INTRODUCTION
Additive manufacturing, originally called "rapid prototyping", brings together innovative part manufacturing processes covering a wide range of applications. It is based on the principle of manufacturing parts by adding material, unlike all so-called "conventional" or "subtractive" processes, which produce parts by deforming or removing material.
Historically, additive manufacturing was developed to rapidly produce prototypes or mock-ups of objects in order to test their concept or design. It is now fully integrated into product design processes, and is all the more beneficial in that it reduces the risks associated with upstream project development, while keeping associated costs under control. In fact, it makes it relatively easy to produce parts whose geometry is identical to that of digital mock-up parts, without the need for an industrialization study.
Additive manufacturing can be referred to by many different names: 3D printing, layered manufacturing, prototyping. It is also often associated with the following terms: Rapid Manufacturing, Rapid Prototyping, Solid Freeform Fabrication (SFF) or Freeform Fabrication, Digital Fabrication, Automated Freeform Fabrication, 3D Printing, Solid Imaging, Layer-Based Manufacturing or Prototyping.
The fundamental principle of additive manufacturing is to distribute and consolidate the input material according to the geometry of the part. To achieve this, we had to solve the following four problems:
accessibility: each elementary voxel of a part to be manufactured must be accessible at least once during the manufacturing cycle. The word "voxel" is a contraction of "VOlumetric pixEL". It is a 3D pixel used to represent an object in 3D space;
the material: the material must become solid during distribution in the shortest possible time to minimize manufacturing time;
topology: the entire volume of the part being manufactured must be described, unlike material removal processes where only the boundary surfaces are required;
Precision: the amount of material to be deposited must be as small as possible, to suit all part and shape topologies. Geometrical precision comparable to that of material removal processes is required.
In order to exist, additive manufacturing has had to respond to these four problems, but above all it has had to improve the solutions in order to optimize its performance and become an industrial process that can be used for small series production.
This article provides a brief history, a description of the principle of additive manufacturing and the associated digital chain,...
Exclusive to subscribers. 97% yet to be discovered!
You do not have access to this resource.
Click here to request your free trial access!
Already subscribed? Log in!
The Ultimate Scientific and Technical Reference
KEYWORDS
ceramic | additive manufacturing | numerical chain
CAN BE ALSO FOUND IN:
Home Industrial engineering Industry of the future Manufacturing of ceramic parts by additive manufacturing technologies
Home Materials Glasses and ceramics Manufacturing of ceramic parts by additive manufacturing technologies
Home Mechanics Additive manufacturing -3D printing Manufacturing of ceramic parts by additive manufacturing technologies
This article is included in
Material processing - Assembly
This offer includes:
Knowledge Base
Updated and enriched with articles validated by our scientific committees
Services
A set of exclusive tools to complement the resources
Practical Path
Operational and didactic, to guarantee the acquisition of transversal skills
Doc & Quiz
Interactive articles with quizzes, for constructive reading
Additive manufacturing of ceramic parts
Bibliography
Standards and norms
The Union de normalisation de la mécanique is responsible, via its UNM 920 commission, for listing all ISO and CEN standards dealing with additive manufacturing.
Directory
Manufacturers – Suppliers – Distributors (non-exhaustive list)
Ceramic additive manufacturing machines using SLS technology :
Phenix systems
http://www.phenix-systems.com/fr
Stereolithography ceramic additive manufacturing machines :
3DCeram
Exclusive to subscribers. 97% yet to be discovered!
You do not have access to this resource.
Click here to request your free trial access!
Already subscribed? Log in!
The Ultimate Scientific and Technical Reference