Français
7. Fields of application
7.1 Water treatment plants
7.1.1 Low turbidity measurements
Ultrapure water: ultrapure water (< 0.05 NTU), high-quality treated water (< 0.1 NTU), steam condensate return.
Drinking water: drinking water leaving the plant or distribution network (< 2 NTU).
Water undergoing potabilization: filtered water (< 5 NTU), decanted water (< 20 NTU), borehole or wellfield water....
The Ultimate Scientific and Technical Reference
This article is included in
Physical measurements
This offer includes:
Knowledge Base
Updated and enriched with articles validated by our scientific committees
Services
A set of exclusive tools to complement the resources
Practical Path
Operational and didactic, to guarantee the acquisition of transversal skills
Doc & Quiz
Interactive articles with quizzes, for constructive reading
Fields of application
Analyzer description
Bibliography
References
Glossary
Turbidity: the reduction in transparency of a liquid due to the presence of undissolved matter (NF EN ISO 7027 standard).
The definitions below are taken from FD ISO GUIDE 30.
Reference material (RM): material or substance for which one or more property values are sufficiently homogeneous and well defined to enable it to...
Regulations
Ministerial Order of February 2, 1998, published in the Journal Officiel of March 3, 1998
* Section III – Surface water pollution
Article 31
For receiving waters to which the provisions of Decree no. 91-1283 of December 19, 1991 apply, the effects of discharge must comply with the following provisions: no increase of more than 30% in suspended solids.
...
Standardization
- Water quality – Turbidity determination. - NF EN ISO 7027 - (mars 2000)
- Qualité de l'eau. Échantillonnage. Partie 1 : lignes directrices pour la conception des programmes et des techniques d'échantillonnage. - NF EN ISO 5667-1 - 2007
- Qualité de l'eau. Échantillonnage. Partie 3 : lignes directrices pour la conservation et la manipulation des échantillons d'eau. - NF EN ISO 5667-3 - 2004
- Qualité de l'eau....
Manufacturers and distributors
Table 1 lists the main equipment manufacturers and their distributors.
Organizations
Association of Measurement, Control and Automation Equipment Operators (Exera) http://www.exera.com/
ISA Instrumentation, Systems and Automation Society http://www.isa.org
The Ultimate Scientific and Technical Reference
