Overview
![](/assets/images/picto-drapeau-france-3a76576a5d60a512053b4612ab58dae5.png)
ABSTRACT
Ceramic biomaterials have been used for orthopedic prostheses since 1965. Alumina, and later zirconia and zirconia-alumina composites were successively introduced, mainly for wear couples (head-cup) in total hip arthroplasty. This article examines these materials, their history, advantages and drawbacks. It concludes with an overview of the developments to come in materials and devices.
Read this article from a comprehensive knowledge base, updated and supplemented with articles reviewed by scientific committees.
Read the articleAUTHORS
-
Laurent GREMILLARD: CNRS Research Director - MATEIS Laboratory, University of Lyon, INSA-Lyon/Université Lyon1/CNRS, Villeurbanne, France
-
Jérôme CHEVALIER: Professor - University of Lyon, MATEIS Laboratory, INSA-Lyon/Université Lyon1/CNRS, Villeurbanne, France - Member of the Institut Universitaire de France
INTRODUCTION
This article presents "bio-inert" ceramics for orthopedic implants (devices implanted in the human body to restore joint function). Other inorganic materials used for prosthesis coatings or bone substitutes ("bio-active" ceramics such as calcium phosphates, glasses or cements) are the subject of specific articles in Techniques de l'Ingénieur, and will deliberately not be discussed here.
While the use of ceramics of natural origin as biomaterials (i.e. bioceramics) dates back several millennia (use of mother-of-pearl as a dental substitute by the Mayans, for example), the controlled use of technical ceramics in contact with the human body came much later (porcelain for the manufacture of dental crowns in the 18th century, plaster of Paris for bone filling in the 19th). It was only in the mid-twentieth century that technical ceramics specifically dedicated to orthopedics appeared: in 1965, alumina (aluminum oxide) was patented for use as a head and cup for hip prostheses. This was the first use of a so-called structural bioceramic (with high mechanical properties). Zirconia and alumina-zirconia composites, with even better mechanical properties, followed for the same applications.
Alumina, zirconia and their composites are considered "bio-inert" ceramics, as they do not bond directly with bone. Indeed, after implantation of a bio-inert ceramic, a fibrous capsule forms, isolating the implant from the bone and limiting its integration. For this reason, these materials are not used for bone filling and rarely come into direct contact with bone (except in the case of zirconia dental implants, which require special surface treatments).
The creation of friction surfaces is therefore the most important application for inert bioceramics in orthopaedics. The use of bioceramics reduces wear on prostheses. Their main use is in the manufacture of components for hip prostheses (heads and cups), but they have also recently been used in certain knee prostheses and mobile cervical prostheses... The clinical successes associated with the use of ceramics have led to the implantation of over 600,000 zirconia hip replacement heads, over 3.5 million alumina heads and almost 2 million alumina-zirconia composite heads since the beginning of their use. The major drawback of ceramics is their intrinsic brittleness (in the mechanical sense of the word: they break before plastic deformation). As a result, the early days were sometimes chaotic (up to 13% fracture rate for certain series of heads in the late 1960s). The rupture rate of alumina heads is now very low (less than 0.01%), and that of alumina-zirconia heads even lower. This failure rate is therefore negligible compared to the overall failure rate of hip prostheses (around 15% at 25 years), which is generally...
Exclusive to subscribers. 97% yet to be discovered!
You do not have access to this resource.
Click here to request your free trial access!
Already subscribed? Log in!
![](/assets/images/logo-eti-286623ed91fa802ce039246e516e5852.png)
The Ultimate Scientific and Technical Reference
KEYWORDS
durability | biocompatibility
CAN BE ALSO FOUND IN:
This article is included in
Healthcare technologies
This offer includes:
Knowledge Base
Updated and enriched with articles validated by our scientific committees
Services
A set of exclusive tools to complement the resources
Practical Path
Operational and didactic, to guarantee the acquisition of transversal skills
Doc & Quiz
Interactive articles with quizzes, for constructive reading
Ceramic materials for orthopedic prostheses
Bibliography
Websites
Numbers of ceramic prostheses implanted http://www.ceramtec.com/ceramic-materials/biolox/delta/ , accessed May 27, 2014.
Standards and norms
- Implants for surgery – Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) - ISO 13356 - 2008
- Surgical implants – Partial and total hip joint prostheses – Part 2: Joint surfaces made of metallic, ceramic and plastic materials - ISO 7206-2 - 2011
- Surgical implants – Ceramic products – Part 1: High-purity alumina-based ceramic products - ISO 6474-1 - 2010
- Surgical implants –...
Patents
Reinforced porous coating. EP1924301 A1
Coating for dental applications. WO2010145822 A1
Directory
Manufacturers of ceramics for orthopedics (non-exhaustive list)
Kyocera (Bioceram AZ209, Al190 ) http://kyocera-md.com/technology/material/index.html
Ceramtec (Biolox® Delta, Biolox® Forte ) http://www.ceramtec.com/
...Statistical and economic data
Haute Autorité de Santé. Revision of generic descriptions for the list of reimbursable products and services "hip joint replacements" 2007 http://www.has-sante.fr
Haute Autorité de Santé. Revision of generic descriptions on the list of reimbursable products and services: knee joint implants. 2012
Exclusive to subscribers. 97% yet to be discovered!
You do not have access to this resource.
Click here to request your free trial access!
Already subscribed? Log in!
![](/assets/images/logo-eti-286623ed91fa802ce039246e516e5852.png)
The Ultimate Scientific and Technical Reference