Français
6. ILSAC classifications
The International Lubricant Standardization and Approval Committee (ILSAC) brings together the American Automobile Manufacturers Association (AAMA) and the Japan Automobile Manufacturers Association (JAMA). Since 1990, it has been developing specifications for low-viscosity, fuel-saving gasoline engine oils (SAE grades 0W-xx, 5W-xx and 10W-xx). These specifications, rated ILSAC GF-x (x = 1, 2, 3...), incorporate the requirements of API service classifications SH, SJ, SL, etc., to which are added fuel economy requirements assessed, as previously mentioned, according to ASTM Sequence VI, VIA and then VIB procedures, as well as minimum laboratory physico-chemical performances.
The Ultimate Scientific and Technical Reference
This article is included in
Friction, wear and lubrication
This offer includes:
Knowledge Base
Updated and enriched with articles validated by our scientific committees
Services
A set of exclusive tools to complement the resources
Practical Path
Operational and didactic, to guarantee the acquisition of transversal skills
Doc & Quiz
Interactive articles with quizzes, for constructive reading
ILSAC classifications
Conclusion
References
In Techniques de l'Ingénieur Traité Génie mécanique
Standardization
Euro emission standards
The evolution of European standards for pollutant emissions from motor vehicle exhausts is summarized in figure 1 for the Euro I to Euro IV standards for the four...
Professional organizations
AAMA American Automobile Manufacturers Association (United States)
ACEA European Automobile Manufacturers' Association (Europe http://www.acea.be
API American Petroleum Institute (United States) http://www.api.org
...
Lubricant additives suppliers
(Non-exhaustive list)
Chevron Oronite Company LLC (United States) : Additives Division of Chevron-Texaco Corp. http://www.chevron.com/prodserv/NewOronite
Chevron Chemical SA (Europe) http://www....
The Ultimate Scientific and Technical Reference
