Overview
Français
ABSTRACT
The spray-drying process consists in obtaining a solid divided by the placing in contact of a warm gas and a fluid dispersed under the form of fine droplets. Playing on operation parameters allows for controlling various end of product properties, such as size, the form of solid particles or else its solubility due to porosity. This article focuses on the technological aspect: pulverization, gas dispersion, recovery of the solid and process safety. Concrete examples based on industrial applications are also provided.
Read this article from a comprehensive knowledge base, updated and supplemented with articles reviewed by scientific committees.
Read the articleAUTHORS
-
François GOMEZ: Senior Lecturer - Process Engineering Department - Compiègne University of Technology
-
Khashayar SALEH: University Professor - Process Engineering Department - Compiègne University of Technology
INTRODUCTION
The spray-drying process is used for a wide range of products in the agro-industrial, pharmaceutical and cosmetics sectors, as well as for the preparation of pigments and mineral fillers. This operation consists in obtaining a divided solid by bringing a hot gas into contact with a fluid dispersed in the form of fine droplets. By adjusting the operating parameters, it is possible to control various properties of the finished product, such as the size and shape of the solid particles, or its solubility via the presence of porosity.
In the
In this dossier [J 2 257], we discuss the technological aspects of the spray drying process, reviewing the spray, gas dispersion and solid recovery stages, as well as the safety aspects of the process. Concrete examples of the use of this process in real-life applications are also described.
The Ultimate Scientific and Technical Reference
KEYWORDS
process | applications | | | spray drying | powder | atomization |
This article is included in
Formulation
This offer includes:
Knowledge Base
Updated and enriched with articles validated by our scientific committees
Services
A set of exclusive tools to complement the resources
Practical Path
Operational and didactic, to guarantee the acquisition of transversal skills
Doc & Quiz
Interactive articles with quizzes, for constructive reading
Powder processing
Process technologies
Bibliography
Events
Powder Science and Technology
Type: symposium
Periodicity: three years
Next event: July 4-6, 2012/Toulouse
International Drying Symposium
Type: symposium
Frequency: every two years
Next event: November 11-15, 2012 Xiamen City-China
...
Directory
Manufacturers – Suppliers – Distributors (non-exhaustive list)
Anderson Custom Processing http://www.andersonprocessing.com
Anhydro SAS http://www.anhydro.com
BUCHI Sarl http://www.buchi.fr/ (Laboratory pilots)...
The Ultimate Scientific and Technical Reference
