Overview
FrançaisABSTRACT
This article deals with magnetically induced vibration and acoustic noise, generated by Maxwell forces in synchronous rotating electrical machines (permanent magnet or wound rotor machines - to the exclusion of variable reluctance machines). The phenomenon of magnetic noise is analyzed, and the different sources of harmonic magnetic forces are characterized analytically in terms of wavenumber and frequency. Analytical and numerical tools which predict the level of radiated noise are presented, as well as various rules of silent design. In conclusion, vibro-acoustic test data are interpreted.
Read this article from a comprehensive knowledge base, updated and supplemented with articles reviewed by scientific committees.
Read the articleAUTHORS
-
Jean LE BESNERAIS: R&D Engineer EOMYS ENGINEERING, 121 rue de Chanzy 59260 Lille Hellemmes, France
-
Pierre PELLEREY: Doctoral engineer in electromechanical engineering
-
Vincent LANFRANCHI: Lecturer at Compiègne University of Technology - Compiègne Electromechanics Laboratory (LEC)
-
Michel HECQUET: Professor at the Ecole Centrale de Lille - Head of department (electronics, electrical engineering and automation) - Lille Laboratory of Electrotechnics and Power Electronics (L2EP)
INTRODUCTION
Just like their efficiency or recyclability, the acoustic noise emitted by electrical machines is part of their environmental impact. The ever-increasing proximity of human beings to this type of machine, whether in industrial applications or in the transport sector with electric vehicles or urban tramways, is prompting engineers to integrate this issue upstream in the design process.
At the same time, minimizing the cost of raw materials suggests that the mechanical structures of electrical machines are more deformable, and therefore noisier.
The overall noise level of an electrical machine comes from three main sources: mechanical noise (bearings, gears, etc.), aerodynamic or hydrodynamic noise (ventilation, turbulence, etc.) and electromagnetic noise. The latter can generally dominate other noise sources, especially at low and medium speeds where airborne noise is still low. Moreover, acoustic noise of magnetic origin is characterized by pure frequency emergences perceived as annoying, in the most sensitive frequency range of the human ear. Understanding the phenomena behind magnetic acoustic noise is therefore of prime importance in designing silent machines, or diagnosing and solving vibro-acoustic problems on existing machines.
Magnetic noise is mainly due to the creation of magnetic forces within the electrical machine, which tend to deform its magnetic parts. The deformations of the machine's magnetic parts will generate acoustic radiation perceptible to the human ear. Predicting magnetic noise therefore requires multiphysics modeling: both an electromagnetic model of the machine, to determine the excitation forces, and a vibro-acoustic model of the excited structure. In addition, the noise must be simulated in variable regime, to take account of resonance phenomena when the excitation frequencies cross those of the machine structure's eigenmodes.
The use of numerical tools such as electromagnetic and vibro-acoustic finite elements during the design phase enables very appreciable levels of accuracy to be achieved. However, this type of modeling raises difficulties, both in terms of calculation time and digital coupling between the various models. Analytical electromagnetic, vibratory and acoustic models have therefore been developed. Their speed enables them to be coupled with optimization algorithms to find the optimum trade-offs between objectives such as minimizing magnetic noise and maximizing electromechanical performance.
We will begin by characterizing all the phenomena likely to produce audible magnetic noise in synchronous machines, fractional or not, with permanent magnets, surface or buried, or with wound rotor. Variable reluctance machines, which have their own electrotechnical...
Exclusive to subscribers. 97% yet to be discovered!
You do not have access to this resource.
Click here to request your free trial access!
Already subscribed? Log in!
The Ultimate Scientific and Technical Reference
KEYWORDS
vibration | transport | energy | synchronous machines | acoustic noise | experimental interpretation | design guidelines
This article is included in
Conversion of electrical energy
This offer includes:
Knowledge Base
Updated and enriched with articles validated by our scientific committees
Services
A set of exclusive tools to complement the resources
Practical Path
Operational and didactic, to guarantee the acquisition of transversal skills
Doc & Quiz
Interactive articles with quizzes, for constructive reading
Acoustic noise of magnetic origin in synchronous machines
Bibliography
Bibliography
Standards and norms
IEC 60034-9 Rotating electrical machines – Part 9: Noise limits
Patents
[B1] Electrical machines with reduced cogging US Patent 7714473 B2
Exclusive to subscribers. 97% yet to be discovered!
You do not have access to this resource.
Click here to request your free trial access!
Already subscribed? Log in!
The Ultimate Scientific and Technical Reference