Français
1. Materials and equipment
All electrical equipment must comply with the European standard EN, or the appropriate HD harmonization document, or the national standard resulting from HD.
The CE mark certifies that the product complies with the safety requirements of the Low Voltage Directive.
1.1 Electrical panel
Protective and isolating devices for divisional and terminal circuits must be installed on a main distribution board and, if necessary, on one or more additional divisional boards located throughout the dwelling.
A minimum reserve of 20% must be maintained for each table.
The on-load disconnecting and isolating device provided for in 558.1 of the NF...
The Ultimate Scientific and Technical Reference
This article is included in
Finishing work and technical packages
This offer includes:
Knowledge Base
Updated and enriched with articles validated by our scientific committees
Services
A set of exclusive tools to complement the resources
Practical Path
Operational and didactic, to guarantee the acquisition of transversal skills
Doc & Quiz
Interactive articles with quizzes, for constructive reading
Materials and equipment
Installations
Standards and norms
- Installations de branchement à basse tension - NF C14-100 - Février 2008
- Low-voltage electrical installations – Compiled version of standard NF C15-100 dated December 2002, its update dated June 2005, its amendments A1 dated August 2008, A2 dated November 2008, A3 dated February 2010, A4 dated May 2013 and A5 dated June 2015, its corrigenda dated October 2010 and November 2012 and interpretation sheets F11, F15,...
Directory
AFNOR
Alliance Elec
Archiexpo
CEDEO...
The Ultimate Scientific and Technical Reference
