Article | REF: AF6621 V1

Sintering: physico-chemical aspects - Part 2: Liquid phase sintering

Authors: Didier BERNACHE-ASSOLLANT, Jean-Pierre BONNET

Publication date: July 10, 2005

You do not have access to this resource.
Click here to request your free trial access!

Already subscribed? Log in!


Overview

Français

Read this article from a comprehensive knowledge base, updated and supplemented with articles reviewed by scientific committees.

Read the article

AUTHORS

 INTRODUCTION

When a liquid is introduced into any granular stack, various phenomena can be observed: the cohesion between grains increases (slightly damp sand heap), part of the porosity is eliminated as the liquid migrates into the pores, sometimes accompanied by a contraction of the stack. What's more, some very slow transformations can be accelerated by faster diffusion in the liquid phase.

These properties of liquids have long been used to facilitate sintering. In silicate ceramics, for example, sandstone formation is the rule, where reactions between the starting constituents form compounds that melt at fairly low temperatures, with the development of an abundant quantity of viscous liquid.

Various technical ceramics are also sintered in the presence of a liquid phase. This is particularly true of highly covalent products such as nitrides, carbides and borides, for which the temperatures required to achieve significant densification by solid-phase sintering are either too high, or incompatible with the chemical stability of the compound. The solution generally adopted to densify these products is to promote the appearance of a liquid in the microstructure by means of a suitably chosen addition. Sintering can be carried out with or without the application of external pressure.

Liquid phase sintering rarely does not involve chemical reactions; when the influence of these reactions is not predominant, interface effects predominate.

Note :

Solid phase sintering was covered in Part 1 of this presentation, dossier of this treatise. Readers are invited to refer to it whenever necessary.

You do not have access to this resource.

Exclusive to subscribers. 97% yet to be discovered!

You do not have access to this resource.
Click here to request your free trial access!

Already subscribed? Log in!


The Ultimate Scientific and Technical Reference

A Comprehensive Knowledge Base, with over 1,200 authors and 100 scientific advisors
+ More than 10,000 articles and 1,000 how-to sheets, over 800 new or updated articles every year
From design to prototyping, right through to industrialization, the reference for securing the development of your industrial projects

This article is included in

Additive manufacturing -3D printing

This offer includes:

Knowledge Base

Updated and enriched with articles validated by our scientific committees

Services

A set of exclusive tools to complement the resources

Practical Path

Operational and didactic, to guarantee the acquisition of transversal skills

Doc & Quiz

Interactive articles with quizzes, for constructive reading

Subscribe now!

Ongoing reading
Sintering: physico-chemical aspects