Overview
![](/assets/images/picto-drapeau-france-3a76576a5d60a512053b4612ab58dae5.png)
ABSTRACT
3D printing of fiber reinforced thermoplastic matrices (discontinuous and continuous) aims at compensating for the moderate mechanical performance of parts printed from pure polymer. This article presents an overview of the technology of Fused Filament Fabrication (FFF) of composites, which should allow to widen the fields of application (aeronautics, offshore racing ...). It then introduces 4D printing, which allows the development of smart materials (sensors or actuators) and to consider complex architectural structures that can be stimulated by various stimuli (humidity, electricity, temperature, pressure ...).
Read this article from a comprehensive knowledge base, updated and supplemented with articles reviewed by scientific committees.
Read the articleAUTHORS
-
Antoine LE DUIGOU: Senior Lecturer - Institut de Recherche Dupuy de Lôme, UMR CNRS 6027, Lorient, France
-
Guillaume CHABAUD: Doctoral student - Institut de Recherche Dupuy de Lôme, UMR CNRS 6027, Lorient, France
-
Mickaël CASTRO: Senior Lecturer - Institut de Recherche Dupuy de Lôme, UMR CNRS 6027, Lorient, France
INTRODUCTION
In 2021, 3D printing using fused filament deposition (FFF) will be the most widely used 3D printing technology, thanks to its simplicity and the low cost of equipment and raw materials, compared with other 3D printing technologies such as stereolithography or selective laser sintering. This technology has been the subject of numerous innovations in terms of the variety of materials that can be used, and in terms of improving the performance of these devices (precision, reproducibility, printing speed, etc.). What's more, the expiry of the FFF patent held by Stratasys ® combined with the RepRap project (The Replicating Rapid Prototyper, a project aimed at developing a fleet of free, self-replicating printers, i.e. capable of printing the parts needed to build these same printers) has made FFF and 3D printing more widely available. In 2019, the 3D printing market was estimated at $13.8 billion, with a projection of $22.7 billion by 2024. Today, 3D printing has become a disruptive innovation present in a wide range of application sectors (automotive, aeronautics, space, medicine, robotics, construction, food industry, marine engineering...).
The main advantage of 3D printing compared with traditional manufacturing processes is its ability to shape finished products in very few steps, with almost infinite freedom of design, thus drastically reducing production costs and speeding up the process. However, the most widespread technology, molten filament deposition, suffers from certain limitations.
Firstly, this technology is very often restricted to the production of prototypes, due to a still incomplete understanding of the process-architecture-properties relationship leading to average mechanical properties. The development of high-performance FFF materials is therefore a major challenge for both academia and industry.
One solution is to modify the formulation of printed materials to include reinforcing fibers (continuous or discontinuous) to improve mechanical performance. In addition, the current environmental context is prompting us to change the way we design, select and manufacture materials. For example, composites reinforced with plant fibers or biocomposites are seen as a credible alternative to certain synthetic composites, particularly as part of an eco-design approach. What's more, 3D printing offers an incredible opportunity for biocomposites to develop for the first time on the same timescale as their synthetic counterparts.
Beyond the need for mechanical performance, the composites industry is expressing a growing need to develop multifunctional composite materials. In this context, 4D printing (3D printed materials with time-dependent properties, whose response...
Exclusive to subscribers. 97% yet to be discovered!
You do not have access to this resource.
Click here to request your free trial access!
Already subscribed? Log in!
![](/assets/images/logo-eti-286623ed91fa802ce039246e516e5852.png)
The Ultimate Scientific and Technical Reference
KEYWORDS
fused filament fabrication | fiber reinforced thermoplastic matrices | smart materials | mechanical performances
CAN BE ALSO FOUND IN:
This article is included in
Additive manufacturing -3D printing
This offer includes:
Knowledge Base
Updated and enriched with articles validated by our scientific committees
Services
A set of exclusive tools to complement the resources
Practical Path
Operational and didactic, to guarantee the acquisition of transversal skills
Doc & Quiz
Interactive articles with quizzes, for constructive reading
3D/4D printing of thermoplastic composites
Bibliography
Standards and norms
- Biomimetics – Terminology, concepts and methodology. - ISO 18458 - 2015
- Biomimicry – Biomimetic materials, structures and components. - ISO 18457 - 2016
- Additive manufacturing – General principles – Terminology. - ISO/ASTM 52900 - 2015
- Additive manufacturing – General principles – Requirements for purchased AM parts. - ISO/ASTM 52901 - 2017
- Additive manufacturing – Material extrusion-based...
Patents
ANDRÉ (J.-C.), LE MÉHAUTÉ (A.), DE WITTE (O.). – "French patent no. 84 11 241, July 16, 1984 (1984).
Exclusive to subscribers. 97% yet to be discovered!
You do not have access to this resource.
Click here to request your free trial access!
Already subscribed? Log in!
![](/assets/images/logo-eti-286623ed91fa802ce039246e516e5852.png)
The Ultimate Scientific and Technical Reference