Overview
FrançaisABSTRACT
The engine noise perceived inside the vehicle passes through various elements, mainly through the engine mounts (high path) and the driveshafts (low path).In general, in vehicles equipped with internal combustion engines, the hooming, rumbling and whirring represent the most important part of the noise and vibration from the engine source.
The reduction of these noises and vibrations can be achieved either by treatment at the source (engine) or by treatment of transfer paths (mounts, driveshafts, body). In the case of driveshafts, the improvement levers consist in optimizing the design of the connecting shafts or installing a vibration absorber on them.
Read this article from a comprehensive knowledge base, updated and supplemented with articles reviewed by scientific committees.
Read the articleAUTHORS
-
Elian BARON: Engineer-Doctor - Powertrain Expert - Renault Automobiles Guyancourt, France
-
Shanjin WANG: Engineer-Doctor - Expert Acoustics Chassis - Renault Automobiles Guyancourt, France
INTRODUCTION
Vibro-acoustic phenomena associated with lateral transmissions can be classified into three categories, depending on whether the role of the transmission is direct, indirect or both.
Direct role: acoustic or vibratory excitation occurs at the level of the transmission itself. This is the case for phenomena linked to the forces generated by constant velocity joints;
Mixed role: excitations come from both the transmission and another source, such as the motor. It is the combination of these various excitations that creates an acoustic or vibratory disturbance;
Indirect role: the excitation is no longer located in the transmission, but comes from another source. This is the case, for example, with the hum phenomenon, when a natural frequency of the wheel half-shaft amplifies a motor excitation.
Phenomena originating in the transmissions are dealt with in detail in the article
In vehicles fitted with internal combustion engines, hum, rumble and engine presence generally account for most of the noise and vibration from the engine source.
Engine hum: this is a low-frequency noise (20-200 Hz) similar to the sound of a bumblebee in flight. It comes directly from combustion in the cylinders and inertia forces linked to the movement of the moving linkage. Its frequency corresponds to the 2 harmonic of crankshaft rotation in a 4-cylinder engine, and to the 1.5 harmonic of crankshaft rotation in a 3-cylinder engine. In general, hum is the strongest component in terms of vibration level;
Engine rumble and presence: these are medium-frequency noises or vibrations (200-800 Hz). More precisely, rumble and presence represent levels in the 250 Hz and 500 Hz octaves respectively, which correspond to levels of motor harmonics higher than those of hum.
Exclusive to subscribers. 97% yet to be discovered!
You do not have access to this resource.
Click here to request your free trial access!
Already subscribed? Log in!
The Ultimate Scientific and Technical Reference
KEYWORDS
booming noise | rumbling noise | whirring noise | transmission vibration absorber | acyclism
This article is included in
Noise and vibration
This offer includes:
Knowledge Base
Updated and enriched with articles validated by our scientific committees
Services
A set of exclusive tools to complement the resources
Practical Path
Operational and didactic, to guarantee the acquisition of transversal skills
Doc & Quiz
Interactive articles with quizzes, for constructive reading
Automotive transmissions
Bibliography
Exclusive to subscribers. 97% yet to be discovered!
You do not have access to this resource.
Click here to request your free trial access!
Already subscribed? Log in!
The Ultimate Scientific and Technical Reference