Overview
FrançaisABSTRACT
The electric railway traction, one aspect of which is to comprise both very high speed and urban and suburban traffic, has a particular dynamic. The definition of its performances encompasses, in particular, the calculation of the necessary effort in operation, the notion of adhesion, the tractive effort/speed characteristic. This article presents the particularities of electric traction units which allow for the appropriate dimensioning of fixed traction installations subjected to mobile and extremely fluctuating loads. It also includes the respective principles of the 1.5kV direct current electric traction supply and 25kV-50Hz traction supplies.
Read this article from a comprehensive knowledge base, updated and supplemented with articles reviewed by scientific committees.
Read the articleAUTHORS
-
Christian COURTOIS: SNCF – Engineering Department - Fixed electrical traction installations department - Head of Division IGTE-ZU1 Power supply equipment for electrified lines
-
Jean COUMEL: Engineer from École nationale supérieure des arts et métiers and SUPELEC - Honorary Executive SNCF - Update of the [D 5 501] file written in 1998 by François LACÔTE, Christian COURTOIS and Marc PROVOOST (SNCF).
INTRODUCTION
Today in France, 54% of the national rail network, i.e. 15,350 km (of which 9,380 km electrified at 25 kV-50 Hz) out of 28,500 km, is electrified and handles over 90% of national rail traffic.
Electric rail traction is currently characterized by the following aspects:
given the power required for trains with a unit capacity of several hundred passengers, it is the sole vector for both very high-speed rail and urban and suburban traffic. Beyond or ahead of high-speed lines, high-speed trains use electrified conventional lines to serve numerous towns and cities;
the pre-eminence of single-phase electrification over DC electrification (cost, capacity) means that new electrifications are almost always 25 kV-50 Hz, with the exception of a few short extensions to the 1.5 kV network. Converting lines electrified at 1.5 kV to single-phase 25 kV, with the requirement for reduced service interruption times, is a current challenge;
major innovations in powertrains, particularly in energy converters and the associated three-phase traction motors. Increased power-to-weight ratios make it possible to produce "polycurrent" traction motors. Thanks to a power factor very close to 1 in all operating conditions, and reduced harmonic spectra, they now make better use of fixed single-phase traction systems. Developments in power converters also concern fixed traction installations (imbalance compensation, improved line power supply through controlled injection of reactive energy);
its strong involvement in the rail interoperability process launched at European level, as part of the development of "technical specifications for interoperability" in the "Energy" domain. This process concerns both the high-speed and conventional rail networks. The Energy subsystem has major interfaces with the Rolling Stock subsystem, in the field of electric traction.
This file includes :
A reminder of railway dynamics and the characteristics of electric motors, which are fundamental to the dimensioning of fixed traction installations subject to moving and highly fluctuating loads;
the respective principles of 1.5 kV DC traction power supplies and 25 kV-50 Hz traction power supplies, including the so-called 2 × 25 kV variant, which was introduced in France in the early 1980s, when the first high-speed line, Paris-Lyon, was electrified.
Exclusive to subscribers. 97% yet to be discovered!
You do not have access to this resource.
Click here to request your free trial access!
Already subscribed? Log in!
The Ultimate Scientific and Technical Reference
This article is included in
Railway systems
This offer includes:
Knowledge Base
Updated and enriched with articles validated by our scientific committees
Services
A set of exclusive tools to complement the resources
Practical Path
Operational and didactic, to guarantee the acquisition of transversal skills
Doc & Quiz
Interactive articles with quizzes, for constructive reading
Electric rail traction
Also in our database
Bibliography
Standards and norms
- Applications ferroviaires. Compatibilité électromagnétique - ENV 50121 - 01-01
- Généralités - ENV 50121-1 -
- Émission du système ferroviaire dans son ensemble vers le monde extérieur - ENV 50121-2 -
- Matériel roulant. Trains et véhicules complets - ENV 50121-3-1 -
- Matériel roulant. Appareils - ENV 50121-3-2 -
- Émission et immunité des appareils de signalisation et de télécommunication...
Software tools
Esmeralda software owned by SNCF infrastructure ingiénierie
Websites
Chinese Railways International Scientific and Technological Information Research Institute, MOR http://www.chineserailwaysintl.com
Documentation Arcueil Institut National de Recherche sur les Transports et leur Sécurité http://www.inrets.fr
...
Events
EPE European Power Electronics Conference and Exhibition. Next conference in September 2009 in Barcelona.
WCRR World Congress on Rail Research every 2 to 3 years. Seoul 2008.
Regulations
Council Directive 96/48/EC of July 23, 1996 on the interoperability of the trans-European high-speed rail system.
Directive 2001/16/EC of the European Parliament and of the Council of March 19, 2001 on the interoperability of the conventional rail system.
Directive 2008/57/EC of the European Parliament and of the Council of June 17, 2008 on the interoperability of the rail...
Exclusive to subscribers. 97% yet to be discovered!
You do not have access to this resource.
Click here to request your free trial access!
Already subscribed? Log in!
The Ultimate Scientific and Technical Reference