Overview
ABSTRACT
Wood-working, in a workshop and on a construction site has always been at the source of accidents and occupational diseases. However, this is not unavoidable and the strict application of regulations, coupled with respecting rules of prevention, allows for a decrease in the number of victims and the seriousness of diseases.Unfortunately, these regulations are often poorly understood by those in charge of companies and workshops. The purpose of this article is to provide information and to outline the regulations in order to contribute to an improvement in working conditions.
Read this article from a comprehensive knowledge base, updated and supplemented with articles reviewed by scientific committees.
Read the articleAUTHOR
-
Jacques JUAN: Independent safety and woodworking consultancy - Former project manager at the FCBA technology institute, - Arts et Métiers engineer
INTRODUCTION
Every year, many workers continue to fall victim to work-related illnesses and accidents, and some die as a result. This situation, which is morally unacceptable, is also unacceptable in terms of the costs borne by the community.
The legislator has taken steps to reduce the number and seriousness of these attacks on workers' health, by strengthening laws and supplementing the Labor Code.
Employers' liability is thus gradually evolving from an obligation of means to an obligation of results. Case law confirms this trend.
Zero accidents and zero illnesses are now added to the well-known zero defects, zero delays, zero paperwork....
Unfortunately, there are quite a few accidents at work, and the risk incurred in woodworking companies is higher than the national average. The causes are fairly standard and differ little from those of other trades: falls and the handling of heavy or bulky objects are the main causes.
Illnesses, on the other hand, are more focused on wood, although musculoskeletal disorders and the carrying of heavy loads predominate, illnesses that are also present in other occupational sectors. These two causes account for over 80% of cases. Solutions for dealing with these pathologies are now fairly well known, even if their implementation is often left to specialists (especially for MSDs). The solution lies in analyzing each situation on a case-by-case basis.
The third cause of illness is specific to machined materials: exposure to wood dust. Even though it ranks far behind the first two in terms of the number of declared illnesses, it is the focus of attention of all those involved in the sector, due to the seriousness of the pathologies. Indeed, it is the only cause of death by disease in the woodworking professions. The number of reported cancers has been fairly stable over the last few years, at around 75 cases a year, with a fairly pessimistic prognosis for recovery.
To meet their obligations, employers need to keep abreast of these rapidly changing and increasingly complex regulations. They must also keep abreast of technological developments, which should provide them with the tools they need to meet their responsibilities more effectively. The non-application of preventive measures (or their inadequate implementation) is increasingly leading to accusations of "inexcusable fault".
Employers often find themselves in unpleasant situations due to a lack of knowledge of their obligations or of technical and organizational solutions.
The following paragraphs are designed to help them perfect their knowledge of the regulatory field, and to provide food for thought and appropriate...
Exclusive to subscribers. 97% yet to be discovered!
You do not have access to this resource.
Click here to request your free trial access!
Already subscribed? Log in!
The Ultimate Scientific and Technical Reference
KEYWORDS
| security | prevention
This article is included in
Wood and paper
This offer includes:
Knowledge Base
Updated and enriched with articles validated by our scientific committees
Services
A set of exclusive tools to complement the resources
Practical Path
Operational and didactic, to guarantee the acquisition of transversal skills
Doc & Quiz
Interactive articles with quizzes, for constructive reading
Mechanical woodworking
Software tools
OREGE Tools for Identifying and Assessing GEsts http://www.inrs.fr
Events
Woodworking machinery trade fairs
• Expobois – in Paris, 1 quarter of even-numbered years
• Ligna – in Hanover, in May of odd-numbered years
• Xylexpo – in Milan, in May of even-numbered years
• Eurobois – in Lyon, in the 1 er quarter of odd-numbered years
...
Standards and norms
Afnor standards (Association française de normalisation)
- Air quality – Workplace air – Aerosol sampling using a cassette (4 mm orifice) - NF X 43-257 - 05-08
- Respiratory protection devices – Particle filtering half-masks – Requirements, testing, marking - NF EN 149+A1 - 09-09
- Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology - NF EN 1127-1...
Regulations
Decrees
• Decree no. 2004-184 of February 25, 2004 revising and supplementing the tables of occupational diseases appended to Book IV of the Social Security Code (Part II: Council of State decrees) NOR: SOCS0420515D (JORF of 02/27/2004, page 3912)
• Décret n° 2007-1121 du 19 juillet 2007 révisant et complétant les tableaux des maladies professionnelles en agriculture annexés...
Directory
Organizations – Federations – Associations (non-exhaustive list)
Organisme Professionnel de Prévention du Bâtiment et des Travaux Publics OPPBTP http://www.oppbtp.fr
Institut National de Recherche et de Sécurité pour la prévention des accidents de travail et des maladies professionnelles INRS
Statistical and economic data
They can be found on the http://www.ameli.fr
Exclusive to subscribers. 97% yet to be discovered!
You do not have access to this resource.
Click here to request your free trial access!
Already subscribed? Log in!
The Ultimate Scientific and Technical Reference