Overview
FrançaisABSTRACT
The aluminium foundry developed significantly in the automotive industry due to attempts at fuel economy, whilst continuing to supply many sectors, such as the mechanical, railway, electric and aeronaitic industries. This article is mainly dedicated to the technical aspects of the aluminium foundry. In order to deal with the mechanical properties of foundry alloys, it is essentail to take into consideration all the factors defining the composition, treatment and geometry of the part as well as the selected casting process. There is a wide range of such processes: sand, shell, low-pressure casting, lost-wax casting, etc. However, their choice always remain impacted by economic and technical imperatives.
Read this article from a comprehensive knowledge base, updated and supplemented with articles reviewed by scientific committees.
Read the articleAUTHORS
-
Michel Garat: Former Vice-President, Research and Development, Casting Alloys, Aluminium Pechiney
-
Information de Publication: This article is an updated reprint of article m4675 by Sylvain JACOB, former Director of Research and Development for Aluminium Pechiney's Casting Alloys Division.
INTRODUCTION
Aluminum casting has enjoyed remarkable growth in the automotive industry, where its use has more than doubled over the past thirty years in response to the quest for lighter, more fuel-efficient vehicles. Although the automobile is the predominant application, the foundry also supplies a number of sectors, including the mechanical, rail, electrical and aeronautical industries.
For a large number of products, the choice of production technique (foundry, mechanically-welded assembly, forging, stamping, extrusion, etc.) and material (aluminum, cast iron, steel, magnesium, copper, polymer, etc.) is a question of both technical and economic considerations. This document focuses on the technical aspects of aluminum casting.
Aluminum alloys for casting are quite different from those for wrought products. The absolutely predominant family is Al-Si, due to the excellent casting properties conferred on aluminum alloys by silicon.
The very notion of the mechanical properties (whether static, fatigue or impact) of cast alloys is complex: it only makes sense if we consider the combination of composition + heat treatment + part geometry + casting process. Mechanical properties are strongly influenced by the solidification rate, which is highly dependent on the last two factors. There is a whole range of foundry processes (sand, shell, low-pressure casting, die-casting, lost wax, lost foam, rheomolding...) and for each part the choice must be made according to economic and technical imperatives. Corrosion resistance can be a critical factor in many applications: it depends essentially on the alloy's composition and heat treatment.
The metallurgical quality of the parts (absence of porosity and inclusions, especially oxides) and their modification or refining treatments are also decisive in obtaining good characteristics, especially with regard to ductility and fatigue, two essential points for safety parts.
Cast aluminium alloys can be made from two main types of raw material:
These are primary alloys, i.e. pure aluminum obtained directly from the pots of an electrolysis plant, to which the constituent elements of the alloy have been added. One method of production assimilated to primary smelting consists in remelting pure aluminum ingots from an electrolysis plant and alloying them with the desired addition metals to produce ingots of casting alloy;
Recovered, sorted and purified scrap, with the necessary addition of metals, is used to produce refining or secondary alloys, which currently account for around two-thirds of total foundry production.
Exclusive to subscribers. 97% yet to be discovered!
You do not have access to this resource.
Click here to request your free trial access!
Already subscribed? Log in!
The Ultimate Scientific and Technical Reference
CAN BE ALSO FOUND IN:
This article is included in
Metal forming and foundry
This offer includes:
Knowledge Base
Updated and enriched with articles validated by our scientific committees
Services
A set of exclusive tools to complement the resources
Practical Path
Operational and didactic, to guarantee the acquisition of transversal skills
Doc & Quiz
Interactive articles with quizzes, for constructive reading
Properties of cast aluminium alloys
Bibliography
Also in our database
Standardization
Bibliographic database
AIA (Aluminium Industry Abstracts).
METADEX.
Association française de normalisation Afnor
- Désignation conventionnelle de modes d'obtention et d'états de livraison de métaux et alliages non ferreux moulés. - NF A 02-002 - 12.1976
European Committee for Standardization CEN
- Aluminium et alliages d'aluminium. Alliages...
Companies. Organizations
Rio Tinto Alcan
Center technique des industries de la fonderie CTIF
Syndicat général des fondeurs de France and related industries
Foundry Technical...
Exclusive to subscribers. 97% yet to be discovered!
You do not have access to this resource.
Click here to request your free trial access!
Already subscribed? Log in!
The Ultimate Scientific and Technical Reference