Français
3. L3VPN IPv6 over an MPLS IPv4 core
This section describes the L3VPN IPv6 solution on an IPv4-only MPLS core network, which is the most common solution for operators beginning the transition from MPLS VPN service to IPv6.
3.1 IPv6 route signalling for BGP/MPLS VPNs
Figure 8 shows a 6VPE topology in which 4 PEs activate the function and support IPv6 VRFs. On this core, special MP-BGP sessions enable the exchange of 6VPE routes, as explained in the following paragraphs. Figure 8 shows an example of a route as presented in the BGP RIB of a 6VPE router.
The Ultimate Scientific and Technical Reference
This article is included in
Security of information systems
This offer includes:
Knowledge Base
Updated and enriched with articles validated by our scientific committees
Services
A set of exclusive tools to complement the resources
Practical Path
Operational and didactic, to guarantee the acquisition of transversal skills
Doc & Quiz
Interactive articles with quizzes, for constructive reading
L3VPN IPv6 over an MPLS IPv4 core
Other encapsulation methods for BGP/MPLS IPv6 VPNs
Bibliography
Also in our database
Standards and norms
- Multiprotocol Label Switching Architecture, ROSAN (E.) et al., IETF RFC 3031 - RFC 3031 - 2001
- BGP/MPLS IP Virtual Private Networks (VPNs), ROSEN (E.), REKHTER (Y.), IETF RFC 4364 - RFC 4364 - 2006
- Softwire Problem Statement, DURAND (A.) et al., IETF RFC 4925 - RFC 4925 - 2007
- BGP-MPLS IP Virtual Private Network (VPN) Extension for IPv6 VPN, De CLERCQ (J.) et al., IETF RFC 4659 - RFC 4659 - 2006 ...
Directory
Organizations – Federations – Associations (non-exhaustive list)
IETF Internet Engineering Task Force http://www.ietf.org/
The Ultimate Scientific and Technical Reference
