Français
4. Coating application
4.1 Application conditions
Generally speaking, the rules of the art require :
apply a coating to a substrate with a moisture content of less than 5% by weight (tested using a moisture meter), otherwise the film will rapidly deteriorate (blistering and flaking in particular);
not to work when climatic conditions do not allow it: temperatures below 10°C or above 25°C, humidity > 80% RH, high winds, etc.
4.2 New work
...
The Ultimate Scientific and Technical Reference
This article is included in
Finishing work and technical packages
This offer includes:
Knowledge Base
Updated and enriched with articles validated by our scientific committees
Services
A set of exclusive tools to complement the resources
Practical Path
Operational and didactic, to guarantee the acquisition of transversal skills
Doc & Quiz
Interactive articles with quizzes, for constructive reading
Coating application
Treatment of singular points and ancillary structures
Bibliography
Standards and norms
- Paints and varnishes – Paint products and coating systems for exterior masonry and concrete – Part 1: Classification. - NF EN 1062-1 - Octobre 2004
- Paints and varnishes – Paint products and coating systems for exterior masonry and concrete – Adaptation of facade cladding to the new classification" (adaptation of this European standard). - XP T34-722 - Septembre 2004
- Products and systems for the protection...
Regulations
DTU 20.1: Masonry walls.
DTU 23.1: Concrete walls.
DTU 26.1: Coatings with hydraulic binder mortars.
DTU 59.1: Painting work.
DTU 59.2: Application of thick plastic coatings.
DTU 42.1: Facade waterproofing.
DTU Th-K 77: Thermal insulation.
DTU Th-G 77:...
Directory
Organisme professionnel de prévention du bâtiment et des travaux publics (OPPBTP) (Professional organization for building and public works prevention)
Scientific and Technical Center for Building (CSTB)
...
The Ultimate Scientific and Technical Reference
