Français
3. Structural studies
3.1 3D material wall dimensioning
The methodology of this section is divided into three stages:
Characterization of resultant forces in walls as a function of hydrodynamic forces;
Characterization of the 3D printed material and its mechanical properties;
modeling and calculation to verify structural strength, identify areas of high stress and optimize thickness or design.
The forces applied to the 3D material walls were calculated on the basis of the maximum pressure force obtained from the hydrodynamic study for a 30-year return swell:
1.6 t/m 2 ...
The Ultimate Scientific and Technical Reference
This article is included in
Technological innovations
This offer includes:
Knowledge Base
Updated and enriched with articles validated by our scientific committees
Services
A set of exclusive tools to complement the resources
Practical Path
Operational and didactic, to guarantee the acquisition of transversal skills
Doc & Quiz
Interactive articles with quizzes, for constructive reading
Structural studies
Realization
Bibliography
Standards and norms
Eurocodes
- Base de calcul des structures. - Eurocode 0-EN 1990 -
- Action sur les structures. - Eurocode 1-EN 1991 -
- Calcul des structures en béton. - Eurocode 2-EN 1992 -
- Calcul des structures en métal. - Eurocode 3-EN 1993 -
- Calcul des structures mixte : acier béton. - Eurocode 4-EN 1994 -
- Calcul des ouvrages en maçonnerie. - Eurocode 6-EN 1996 - ...
Directory
Manufacturers – Suppliers – Distributors (non-exhaustive list)
SEABOOST, marine design and construction: ecology and coastal erosion control, Montpellier, France : https://www.seaboost.fr/
CYBE, 3D concrete printing, Oss, Netherlands : https://cybe.eu/
...
The Ultimate Scientific and Technical Reference
