2. Large families
The industrial offer for parquet flooring can be grouped into the main families defined here.
2.1 Solid wood flooring
Standard NF B 54-000 of July 1974 defines the manufacturing characteristics of these parquets, which are installed by nailing, and refers to specific appearance classification standards.
Some manufacturers offer glued solid wood floorboards.
For species whose grading is not covered by a standard, the quality of the boards must be specified in the specific contract documents (DPM). Tables 4 and 5 summarize the characteristics...
The Ultimate Scientific and Technical Reference
This article is included in
The finishing and equipment of the building
This offer includes:
Knowledge Base
Updated and enriched with articles validated by our scientific committees
Services
A set of exclusive tools to complement the resources
Practical Path
Operational and didactic, to guarantee the acquisition of transversal skills
Doc & Quiz
Interactive articles with quizzes, for constructive reading
Large families
Before laying
Economic data
-
Production and consumption of parquet flooring
In 1996, parquet consumption accounted for 6% of all floor coverings (table 1 ). This figure was 4% in 1992. There has thus been an increase in the share of parquet flooring in total floor covering...
Bibliography
References
Website
The www.xylonet.org website contains a wealth of information on the timber industry (standards, organizations, etc.).
Regulations
Fire behavior
Regulations applicable to residential buildings and ERP (excluding IGH)
ERP: établissement recevant du public; IGH: immeuble de grande hauteur.
ERP buildings are governed by the French decree of January 31, 1986, which requires parquet floors to be rated M4 for reaction to fire.
...
Standardization
General standards
- Wood – Parts list - NF B 50-001 - 1-1971
- Wood – Vocabulary - NF B 50-002 - 8-1961
- Wood – Vocabulary - NF B 50-003 - 4-1985
- Wood and wood products – Biohazard analysis – Class definitions – Minimum specifications for preventive preservation - NF B 50-100 - 3-1986
- Wood – Physical and mechanical characteristics of wood - NF B 51-002 - 2-1942
- Wood – Determination...
NF CTBA quality marks
There are two NF quality marks for parquet flooring:
"NF Parquets" for hardwood and engineered parquets;
"NF Panelling and parquet flooring in maritime pine" for parquet flooring made exclusively from this species.
The purpose of the "NF Parquets" mark is to make available to project managers and...
Main manufacturers
Berrywood
Boen
Forbo
Höhns
Huot Bauwerk
Lemoine
Margaritelli
Marty
Morin
Ober
Panaget
P. Berrihonne
Seriparquet...
Organizations
Center technique du bois et de l'ameublement CTBA
Center Scientifique et Technique du Bâtiment CSTB
Center expérimental de recherche et d'études du bâtiment et des travaux publics CEBTP
The Ultimate Scientific and Technical Reference
